[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Sigmarion II with LAN



 望月というものです。
 シグマリオンII+NetBSD1.6で、Pocket Gear用のUSB接続ケーブル(MC/PG-UK02)経由でUSB-LANアダプタが
一応動作しましたので報告します。確認したのはメルコのLUA−TXというUSB-LANアダプターです。

 LANアダプタを認識させるのに少しコツが要ります。
 NetBSD起動時に最初からLANアダプタを繋いでおくとUSBが認識できなくなるようです。
 最初にマウスを繋いでおくか、USB接続ケーブルだけ繋いでおいて、NetBSD起動後にLANアダプタを繋ぐと
認識されるようです。下のdmesgは、マウスを最初に繋いでおいて、あとからLANに差し替えたところです。
 ifconfigとかrouteとかを設定してやれば、pingぐらいなら問題はありません。

これで、sigmarion IIへのNetBSDのインストールに他のhpcmipsのマシンがなくてもOK、と思ったのですが、
落とし穴がありました。
 FTPで大きなファイルを落としているとioerrorが頻繁に出ます(下のdmesgの最後にも出てますが・・)。
平均して10秒に1回ぐらい発生して、baseかcompのダウンロードの途中に死んでしまうため、今のところ
sigmarionII単体でのインストールは成功していません。
まだ、しばらくはLANとCFが両方使えるhpcmipsのマシンが必要のようです。


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6 (GENERIC) #0: Sun Sep  8 17:51:40 UTC 2002
    autobuild@tgm.daemon.org:/autobuild/hpcmips/OBJ/autobuild/src/sys/arch/hpcmips/compile/GENERIC
DoCoMo sigmarionII (NEC VR4131 rev0.2 180.633MHz)
total memory = 32768 KB
avail memory = 26796 KB
using 435 buffers containing 1740 KB of memory
mainbus0 (root)
cpu0 at mainbus0: NEC VR4100 CPU (0xc80) Rev. 8.0 with software emulated floating point
cpu0: 16KB/32B 2-way set-associative L1 Instruction cache, 32 TLB entries
cpu0: 16KB/16B 2-way set-associative write-back L1 Data cache
vr4122ip0 at mainbus0
vrbcu0 at vr4122ip0 addr 0x0f000000-001f
vrbcu0: cpu 180.633MHz, bus 22.579MHz, ram 90.316MHz
vrcmu0 at vr4122ip0 addr 0x0f000060-007f
vrgiu0 at vr4122ip0 addr 0x0f000140-015f
hpcioman6 at vrgiu0
hpcin0 at hpcioman6 iochip vrgiu0, port 0, type 5, id 24576, interrupt level high
com0 at vrgiu0 addr b600000, half word aligned: ns16550a, working fifo
com1 at vr4122ip0 addr 0x0f000800-0807: ns16550a, working fifo
vrrtc0 at vr4122ip0 addr 0x0f000100-011f
vrpmu0 at vr4122ip0 addr 0x0f0000c0-00df
vrled0 at vr4122ip0 addr 0x0f000180-018f
vrpciu0 at vr4122ip0 addr 0x0f000c00-0dff
pci0 at vrpciu0 bus 0
pci0: i/o space, memory space enabled, rd/line ok
vrc4173bcu0 at pci0 dev 12 function 0: NEC VRC4173 Bus Control Unit (rev. 0x00)
vrc4173bcu0: default clock mask is 1d23
vrc4173bcu0: interrupting at pciintr 0:12:0
vrkiu0 at vrc4173bcu0 addr 0x0100-011f
hpckbd0 at vrkiu0
wskbd0 at hpckbd0 mux 1
vrpiu0 at vrc4173bcu0 addr 0x00a0-00bf, 0x00c0-00df
wsmouse0 at vrpiu0 mux 0
NEC VRC4173 AC97 Unit (audio multimedia, revision 0x01) at pci0 dev 12 function 1 not configured
ohci0 at pci0 dev 12 function 2: NEC USB Host Controller (rev. 0x01)
ohci0: interrupting at pciintr 0:12:2
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
mqvideo0 at pci0 dev 13 function 0: MQ200 Rev.02 video controller, console
mqvideo0: framebuffer address: 0xb0800000
  PLL1: 53.452MHz(0x0e56242a, 12.288MHzx 87/ 20)
  PLL2: 30.021MHz(0x00d60a30, 12.288MHzx215/ 88)
  PLL3: disable
   MEM: 30.021MHz(PLL2)
    GE: 30.021MHz(PLL2)
   GC1: disable
   GC2: 21.380MHz(PLL1/2.5/1), FP
hpcfb0 at mqvideo0: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0 at hpcfb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
vrisab6 at vrgiu0: ISA port 0xb800000-0x18000000 mem 0xa000000-0x14000000
isa6 at vrisab6
pcic0 at isa6 port 0x3e0-0x3e1 iomem 0x10000-0x13fff irq 589827
pcic0: controller 0 (Cirrus PD672X) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
btnmgr0 at mainbus0
wskbd1 at btnmgr0 mux 1
wskbd1: connecting to wsdisplay0
hpcapm0 at mainbus0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
pcic0: using irq 589827 for socket events
wdc1 at pcmcia0 function 0uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
 port 0xb800400-0xb80040f
wd0 at wdc1 channel 0 drive 0: <IBM-DSCM-11000>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 1027 MB, 2088 cyl, 16 head, 63 sec, 512 bytes/sect x 2104704 sectors
boot device: wd0
root on wd0a dumps on wd0b
pcmcia0: card irq 3
pcmcia0: card irq 3
pcmcia0: card irq 3
pcmcia0: card irq 3
root file system type: ffs
uhidev0: at uhub0 port 1 (addr 2) disconnected
wsmouse1 detached
ums0 detached
uhidev0 detached
aue0 at uhub0 port 1
aue0: LUA-TX MELCO LUA-TX, rev 1.10/1.01, addr 2
aue0: Ethernet address 00:40:26:61:7c:1d
ukphy0 at aue0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0010a9, model 0x0021, rev. 11
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
aue0: at uhub0 port 1 (addr 2) disconnected
ukphy0 detached
aue0 detached
aue0 at uhub0 port 1
aue0: LUA-TX MELCO LUA-TX, rev 1.10/1.01, addr 2
aue0: Ethernet address 00:40:26:61:7c:1d
ukphy0 at aue0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0010a9, model 0x0021, rev. 11
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
aue0: 1 usb errors on intr: IOERROR

------------------------------------------------------------
望月宣宏   (もちづき よしひろ) 
E-mail : ymochi@attglobal.net