[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

G4 Cube



というわけで動きました。
うまく netboot してくれないので大変だったのでした。

# ほんの少しですが直さないといけないところがあります。これはちゃんと
# 書き直してから…。

NetBSD 1.5E (CUBE) #8: Fri Sep 22 21:44:03 JST 2000
    tsubai@moeko:/a/0916/src/sys/arch/macppc/compile/CUBE
total memory = 1536 MB
avail memory = 1474 MB
using 1024 buffers containing 4096 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 7400 (Revision 209), ID 0 (primary)
cpu0: 1MB backside cache
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Interface (rev. 0x00)
ofb0 at pci0 dev 16 function 0: ATI Technologies product 0x5046
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0: console (std, vt100 emulation)
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
obio0 at pci1 dev 23 function 0: addr 0x80000000
i2s at obio0 offset 0x10000 not configured
zsc0 at obio0 offset 0x13000: irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
adb0 at obio0 offset 0x16000 irq 25: 0 targets
wdc0 at obio0 offset 0x1f000 irq 19: DMA transfer
atapibus0 at wdc0 channel 0
cd0 at atapibus0 drive 1: <MATSHITADVD-ROM SR-8186, , F113> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0 at wdc0 channel 0 drive 0: <QUANTUM FIREBALLP LM30.0>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 28629 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 58633344 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wdc1 at obio0 offset 0x20000 irq 20: DMA transfer
wdc2 at obio0 offset 0x21000 irq 21: DMA transfer
radio at obio0 offset 0x30000 not configured
ohci0 at pci1 dev 24 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci1: interrupting at irq 28
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
Texas Instruments TSB12LV26 OHCI IEEE 1394 Host Controller (Firewire serial bus, interface 0x10) at pci1 dev 26 function 0 not configured
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
gm0 at pci2 dev 15 function 0: Ethernet address 00:30:65:6e:cf:22
gm0: interrupting at irq 41
ukphy0 at gm0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0004de, model 0x000e, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhub2 at uhub0 port 1uaudio0 at uhub1 port 1 configuration 1 interface 0
uhub2: Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/1.00, addr 2
: Apple Computer, Inc. Speakers, rev 1.10/0.01, addr 2
uhub2: 3 ports with 2 removable, bus powered
uaudio0: streaming interface 1, audio rev 1.00
audio0 at uaudio0: half duplex
ukbd0 at uhub2 port 1 configuration 1 interface 0
ukbd0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.01, addr 3, iclass 3/1
wskbd1 at ukbd0: console keyboard, using wsdisplay0
boot device: cd0
root on gm0
nfs_boot: trying DHCP/BOOTP
nfs_boot: BOOTP server: 10.9.5.1
nfs_boot: my_addr=10.9.5.9
nfs_boot: my_mask=255.0.0.0
root on mirei:/export/cube
...