[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
G4 Dual 800MHz
今こんな感じです。
まだ2つめのCPUはまともに動きません(スピンしてるだけ)。
tumbler (i2s) は鳴るけど音量が変わりません。
Apple PowerMac3,5 4.2.5f1 BootROM built on 08/16/01 at 22:19:35
Copyright 1994-2001 Apple Computer, Inc.
All Rights Reserved.
Welcome to Open Firmware, the system time and date is: 15:12:04 08/31/2001
0 > boot
CLIENT: 0003931964f6 192.168.253.20
SERVER: 004005a75923 192.168.253.1
Transfer FILE: ofwboot.elf -
TFTP-actual=e6f0 TFTP-adler32=ffde4d0e load-size=e6f0 adler32=ffde4d0e
Loading ELF
>> NetBSD/macppc OpenFirmware Boot, Revision 1.3
>> (tsubai@erika, Thu Mar 8 01:53:13 JST 2001)
CLIENT: 0003931964f6 192.168.253.20
SERVER: 004005a75923 192.168.253.1 Using IP address: 192.168.253.20
root addr=192.168.253.1 path=/export/macppc
start=0x100000
[ using 129800 bytes of netbsd ELF symbol table ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 1.5X (SILVER_MP) #20: Fri Aug 31 16:11:58 JST 2001
tsubai@moeko:/a/0824/src/sys/arch/macppc/compile/SILVER_MP
total memory = 256 MB
avail memory = 229 MB
using 2048 buffers containing 13208 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 7450 (Revision 201), ID 0 (primary)
cpu0: HID0 8450c0bc<TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT>
cpu0: 256KB on-chip L2 cache, 2MB backside L3 cache
cpu1 at mainbus0: 7450 (Revision 201), ID 1
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Interface (rev. 0x00)
ofb0 at pci0 dev 16 function 0: Nvidia Corporation GeForce2 MX [NV11]
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
tumbler0 at obio0 offset 0x10000: irq 30,1,2
audio0 at tumbler0: full duplex
adb0 at obio0 offset 0x16000 irq 47: 0 targets
wdc0 at obio0 offset 0x1f000 irq 19: DMA transfer
wdc1 at obio0 offset 0x20000 irq 20: DMA transfer
atapibus0 at wdc1 channel 0: 2 targets
cd0 at atapibus0 drive 0: <LITE-ON LTR-12102C, , RAVC> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wdc2 at obio0 offset 0x21000 irq 21: DMA transfer
ohci0 at pci1 dev 24 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci1: interrupting at irq 28
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
Lucent Technologies product 0x5811 (Firewire serial bus, interface 0x10) at pci2 dev 14 function 0 not configured
gm0 at pci2 dev 15 function 0: Ethernet address 00:03:93:19:64:f6
gm0: interrupting at irq 41
brgphy0 at gm0 phy 0: BCM5411 1000BASE-T media interface, rev. 1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
boot device: gm0
root on gm0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 192.168.253.1
nfs_boot: my_addr=192.168.253.20
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.253.1
root on 192.168.253.1:/export/macppc
root file system type: nfs
/etc/rc: Can't open /etc/rc
Aug 31 15:12:43 init: /etc/pwd.db: No such file or directory
Enter pathname of shell or RETURN for sh:
#