[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Xserve 1.33GHz



次、Xserve いきます。
# いんてる、はいってる…。(;_;)

0 > boot cd:,boot

Loading ELF

>> NetBSD/macppc OpenFirmware Boot, Revision 1.5
>> (tsubai@lumiere, Sat Mar 29 19:35:36 JST 2003)
6147104+223284=0x6136b8
 start=0x800000
[ netbsd ELF symbol table not valid ]
[ no symbol table formats found ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6Q (MERCREDI) #0: Sat Mar 29 20:16:25 JST 2003
        tsubai@lumiere:/a/0329/src/sys/arch/macppc/compile/MERCREDI
total memory = 1024 MB
avail memory = 930 MB
using 2048 buffers containing 52528 KB of memory
bootpath: /pci@f2000000/pci-bridge@d/mac-io@7/ata-4@1f000/disk@0
mainbus0 (root)
cpu0 at mainbus0: 7455 (Revision 303), ID 0 (primary)
cpu0: HID0 8450c1bc<TBEN,NAP,DPM,ICE,DCE,XBSEN,SGE,BTIC,LRSTK,FOLD,BHT>
cpu0: HID1 80018c80<EMCP,PC0,PC1,SYNCBE,ABE>
cpu0: 256KB on-chip L2 cache, 2MB backside L3 cache
cpu1 at mainbus0 not configured
nvram0 at mainbus0: addr 0xfff04000, size 0x4000
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
Broadcom Corporation BCM5703X 10/100/1000 Ethernet (ethernet network, revision 0x02) at pci0 dev 16 function 0 not configured
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
ppb0 at pci1 dev 13 function 0: Intel S21152BA,S21154AE/BE PCI to PCI Bridge (rev. 0x00)
pci2 at ppb0 bus 1
pci2: i/o space, memory space enabled
obio0 at pci2 dev 7 function 0: addr 0x80000000
ki2c0 at obio0 offset 0x18000
pwm at obio0 offset 0x30 not configured
zsc0 at obio0 offset 0x13000: irq 22,6,23,8
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
i2s at obio0 offset 0x10000 not configured
adb0 at obio0 offset 0x16000 irq 47: 0 targets
wdc0 at obio0 offset 0x1f000 irq 19
atapibus0 at wdc0 channel 0: 2 targets
cd0 at atapibus0 drive 0: <QSI CD-ROM TCR-241, , WL09> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
ohci0 at pci2 dev 8 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci2 dev 9 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci1: interrupting at irq 28
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ppb1 at pci1 dev 17 function 0: Intel S21152BA,S21154AE/BE PCI to PCI Bridge (rev. 0x00)
pci3 at ppb1 bus 2
pci3: i/o space, memory space enabled
ofb0 at pci3 dev 2 function 0: ATI Technologies Radeon 7000/VE
ofb0: 800 x 600, 8bpp
wsdisplay0 at ofb0 (kbdmux ignored)
pciide0 at pci1 dev 21 function 0: Promise Ultra133TX2v2/ATA Bus Master IDE Accelerator (rev. 0x03)
pciide0: bus-master DMA support present
pciide0: primary channel configured to native-PCI mode
pciide0: using irq 58 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST360015A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 57241 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 117231408 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (using DMA data transfers)
pciide0: secondary channel configured to native-PCI mode
pciide1 at pci1 dev 27 function 0: Promise Ultra133TX2v2/ATA Bus Master IDE Accelerator (rev. 0x03)
pciide1: bus-master DMA support present
pciide1: primary channel configured to native-PCI mode
pciide1: using irq 63 for native-PCI interrupt
pciide1: secondary channel configured to native-PCI mode
uninorth2 at mainbus0
pci4 at uninorth2 bus 0
pci4: i/o space, memory space enabled
pchb2 at pci4 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
Apple Computer product 0x0033 (undefined subclass 0x00) at pci4 dev 13 function 0 not configured
fwohci0 at pci4 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x01)
fwohci0: interrupting at irq 40
fwohci0: OHCI 1.1, 00:03:93:ff:fe:cc:3e:95, 800Mb/s, 4096 max_rec, 8 ir_ctx, 8 it_ctx
gm0 at pci4 dev 15 function 0: Ethernet address 00:03:93:cc:3e:95
gm0: interrupting at irq 41
brgphy0 at gm0 phy 0: BCM5421 1000BASE-T media interface, rev. 1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
md0: internal 2048 KB image area
fw0 at fwohci0: 00:03:93:ff:fe:cc:3e:95:0b:03:ff:ff:f0:01:00:00
boot device: cd0
root on md0a dumps on md0b
root file system type: ffs
#