[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: acardide?



<E1AkiGm-0002qb-5S@moeko.iri.co.jp>の記事において
tsubai@iri.co.jpさんは書きました。

> 今年に入ってからのソースで acardide って動いていますか?
> NetBSD 全般の話題のようなきもするけど acardide なんて macppc
> ぐらいでしか使っていそうにないのでここで聞いてみます。
> # どーせ筒井さんへの私信みたいなもんだし。:-)

えーと、世の中であと5人くらいは使ってそうな気もしますが、
うちでは部屋内サーバーマシンの arc で同じ ATP860-A 使ってて
---
eclipse-% cat /var/run/dmesg.boot
 :
NetBSD 1.6ZG (ECLIPSE) #488: Thu Dec 18 00:19:56 JST 2003
        tsutsui@mirage:/usr/src/sys/arch/arc/compile/ECLIPSE
NEC Express 5800/230 R4400 PCI
total memory = 256 MB
avail memory = 231 MB
using 3302 buffers containing 13208 KB of memory
mainbus0 (root)
cpu0 at mainbus0: MIPS R4400 CPU (0x460) Rev. 6.0 with MIPS R4010 FPC Rev. 0.0
 :
acardide0 at pci0 dev 4 function 0
acardide0: Acard ATP860-A Ultra66 IDE Controller (rev. 0x01)
acardide0: bus-master DMA support present
acardide0: primary channel wired to native-PCI mode
acardide0: using int C for native-PCI interrupt
atabus0 at acardide0 channel 0
acardide0: secondary channel wired to native-PCI mode
atabus1 at acardide0 channel 1
 :
wd0 at atabus0 drive 0: <IBM-DJNA-352030>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19470 MB, 39560 cyl, 16 head, 63 sec, 512 bytes/sect x 39876480 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(acardide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) \
(using DMA data transfers)
wd1 at atabus1 drive 0: <IBM-DTLA-305020>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 19623 MB, 39870 cyl, 16 head, 63 sec, 512 bytes/sect x 40188960 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1(acardide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) \
(using DMA data transfers)
 :
eclipse-% uptime
 9:38PM  up 37 days, 21:59, 2 users, load averages: 0.31, 0.26, 0.18
eclipse-%
---
てな感じです。wd0 や wd1 には各種ソースやその他もろもろを
NFS export のために置いてて一番アクセスされるところなので
発現してないだけということはないと思いますが、たしか
options DIAGNOSTIC をはずしてしまっているのでたまたまかも。

uptime を見ればわかる通り今年に入ってからのソースは試してません。
---
Izumi Tsutsui
tsutsui@ceres.dti.ne.jp