[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AlphaStation 600

引越しにともない、AlphaStation 600 5/266を処分しようと思いま
す。メモリ192MB、フレームバッファはZLXp-L1、RZ28M (2GB HDD、
Digital Unix 4.0Fプリインストール) で、希望者にはTGA、
Seagateの4GB WIDE-SCSI HDD、21140A pass 2.2のNIC (Digital
Unixからは使えません)、Windows NT 4.0 Workstationをつけます。
キーボードとマウスはありませんが、普通のPS/2のものが使えます。

NetBSD、Debian、Windows NT 4.0が動作するのは確認済みですが、
ZLXp-L1ではPC-UNIXでは高価なVGAとしてしか動作しませんし、NT
はまったく動きません。

4月中に川崎市中原区まで取りに来られる方に限ります。いろいろ
とものいりなので、1万円くらいで買ってくれるとありがたいなぁ
(いいけど)。希望者は今週中くらいまでに連絡下さい。複数あった
場合は適当にお話ししましょう。

[ using 305072 bytes of netbsd ELF symbol table ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5ZC (TINK) #105: Sun Mar 31 23:32:43 JST 2002
    root@:/usr/obj/sys/arch/alpha/compile/TINK
Digital AlphaStation 600 5/266, 266MHz, s/n 
8192 byte page size, 1 processor.
total memory = 192 MB
(2256 KB reserved for PROM, 189 MB used by NetBSD)
avail memory = 172 MB
using 1227 buffers containing 9816 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164-0
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (ALCOR/ALCOR2), pass 2
pci0 at cia0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vga0 at pci0 dev 7 function 0: Digital Equipment product 0x0017 (rev. 0x01)
wsdisplay0 at vga0 kbdmux 1: console (80x24, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb0 at pci0 dev 8 function 0: Digital Equipment DECchip 21050 PCI-PCI Bridge (rev. 0x02)
pci1 at ppb0 bus 1
pci1: memory space enabled, rd/line, wr/inv ok
Digital Equipment DECchip 21040 ("Tulip") Ethernet (ethernet network, revision 0x23) at pci1 dev 0 function 0 not configured
isp0 at pci1 dev 1 function 0
isp0: interrupting at kn20aa irq 17
isp0: Board Type 1020, Chip Revision 0x1, loaded F/W Revision 4.66.0
isp0: Last F/W revision was 5.57.1
scsibus0 at isp0: 16 targets, 8 luns per target
isp1 at pci1 dev 2 function 0
isp1: interrupting at kn20aa irq 18
isp1: Board Type 1020, Chip Revision 0x1, loaded F/W Revision 4.66.0
isp1: Last F/W revision was 5.57.1
scsibus1 at isp1: 16 targets, 8 luns per target
tlp0 at pci0 dev 9 function 0: DECchip 21140A Ethernet, pass 2.2
tlp0: interrupting at kn20aa irq 12
tlp0: Ethernet address 00:90:cc:0f:c9:5c
ukphy0 at tlp0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000676, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pceb0 at pci0 dev 10 function 0: Intel 82375EB/SB PCI-EISA Bridge (PCEB) (rev. 0x05)
eisa0 at pceb0
isa0 at pceb0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
wss0 at isa0 port 0x530-0x537 irq 9 drq 0: AD1848K
audio0 at wss0: half duplex, mmap
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <DEC, RZ28M    (C) DEC, 0568> SCSI2 0/direct fixed
sd0: 2007 MB, 3045 cyl, 16 head, 84 sec, 512 bytes/sect x 4110480 sectors
sd0: sync (100.0ns offset 12), 16-bit (20.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <SEAGATE, ST15150W, 6541> SCSI2 0/direct fixed
sd1: 4095 MB, 3712 cyl, 21 head, 107 sec, 512 bytes/sect x 8388315 sectors
sd1: sync (100.0ns offset 12), 16-bit (20.000MB/s) transfers, tagged queueing
cd0 at scsibus0 target 6 lun 0: <TOSHIBA, CD-ROM XM-3501TA, 2694> SCSI2 5/cdrom removable
cd0: async, 8-bit transfers
scsibus1: waiting 2 seconds for devices to settle...
root on sd1a dumps on sd1b
root file system type: ffs
wsdisplay0: screen 1 added (80x24, vt100 emulation)
wsdisplay0: screen 2 added (80x24, vt100 emulation)
wsdisplay0: screen 3 added (80x24, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
cd0: no disk label