RE: MC/R530 framebuffer address

[Takeshi Shibagaki <ie9t-sbgk@asahi-net.or.jp>]

柴垣です。

From: "TAKEMURA, Shin" <takemura@netbsd.org>
Subject: RE: MC/R530 framebuffer address
Date: Sat, 8 Jan 2000 17:54:37 +0900
Message-ID: <003101bf59b5$fee5f820$0101a8c0@shin>

takemura> ＃R430 を持っているひとっていますか？

遅い反応ですけど。。。

R530のentryでうまいことboot出来ました。frame bufferも特に問題ない
ようです。こんな感じ。

他に知りたい情報がありましたら言って下さい。


Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4P (GENERIC) #8: Mon Jan 17 20:16:19 JST 2000
    shin@touji:/work/src/current/src/sys/arch/hpcmips/compile/GENERIC
NEC VR4121 rev1.2 168.521MHz
total memory = 16384 KB
avail memory = 13072 KB
using 230 buffers containing 920 KB of memory
/work/src/current/src/sys/arch/hpcmips/vr/vr.c(235): vr_bus_reset() not implemented.
mainbus0 (root)
cpu0 at mainbus0: cpu0: NEC VR4100 CPU Rev. 6.0 with software emulated floating point Rev. 0.0
cpu0: L1 cache: 16KB/16B Instruction, 8KB/16B Data, direct mapped
cpu0: No L2 cache
fb0 at mainbus0: rasops 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0 at fb0: console (std, vt100 emulation)
/work/src/current/src/sys/arch/hpcmips/dev/fb.c(502): fb_alloc_screen()
vrip0 at mainbus0
vrcmu0 at vrip0 addr 0xb000060-0xb00007f
vrgiu0 at vrip0 addr 0xb000100-0xb00011f intr 8
WIN setting:                                iiiiiiiiiiiiiiiiIiIIiiIiiiiiIIii
I/O setting:                                iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
       data:;,,,,,,,,,,;;,,;;,,,,,;,,,;;,,,,................................
pwctl0 at vrgiu0 port=14 id=0
vrbcu0 at vrip0 addr 0xb000000-0xb00001f
com0 at vrip0 addr 0xc000000-0xc000007 intr 9: ns16550a, working fifo
vrrtc0 at vrip0 addr 0xb0000c0-0xb0000df intr 2
vrkiu0 at vrip0 addr 0xb000180-0xb00019f intr 7
wskbd0 at vrkiu0 (mux 1 ignored for console): console keyboard, using wsdisplay0
vrpmu0 at vrip0 addr 0xb0000a0-0xb0000bf intr 1
vrpmu: cnt 0x5002: .|.|..........|.
vrpmu: cnt2 0x0: ................
vrpmu: wait 0xa00 div 0x3
vrdsu0 at vrip0 addr 0xb0000e0-0xb0000e7
vrpiu0 at vrip0 addr 0xb000120-0xb0002bf intr 5
wsmouse0 at vrpiu0
vrisab0 at vrgiu0:ISA port 0x14000000-0x18000000 mem 0x10000000-0x20000000
isa0 at vrisab0
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 589827
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only
ISA IRQ 3 -> GPIO port 9
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcmcia1: CIS version PCMCIA 2.0 or 2.1
pcmcia1: CIS info: PC CARD MANUFACTURER, PCMCIA ATA/ATAPI Adapter, Version 3.00
pcmcia1: Manufacturer code 0xffff, product 0x3
pcmcia1: function 0: fixed disk, ccr addr 800 mask 1
pcmcia1: function 0, config table entry 37: I/O card; irq mask fe00; iomask a, iospace 180-187 386-387; rdybsy_active wp_active bvd_active io16 irqpulse irqlevel
pcmcia1: function 0, config table entry 13: I/O card; irq mask fe00; iomask a, iospace 170-177 376-377; rdybsy_active wp_active bvd_active io16 irqpulse irqlevel
pcmcia1: function 0, config table entry 21: I/O card; irq mask fe00; iomask a, iospace 1e8-1ef 3ee-3ef; rdybsy_active wp_active bvd_active io16 irqpulse irqlevel
pcmcia1: function 0, config table entry 29: I/O card; irq mask fe00; iomask a, iospace 168-16f 36e-36f; rdybsy_active wp_active bvd_active io16 irqpulse irqlevel
pcmcia1: function 0, config table entry 5: I/O card; irq mask fe00; iomask a, iospace 1f0-1f7 3f6-3f7; rdybsy_active wp_active bvd_active io16 irqpulse irqlevel
wdc0 at pcmcia1 function 0 port 0x180-0x187 port 0x386-0x387
isa_intr_alloc:............................|...
pcmcia1: card irq 3
wd0 at wdc0 channel 0 drive 0: <IBM-DDLA-20810>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 775MB, 1575 cyl, 16 head, 63 sec, 512 bytes/sect x 1587600 sectors
wd0: drive supports PIO mode 4, DMA mode 2
pcmcia2 at pcic0 controller 1 socket 0
/work/src/current/src/sys/arch/hpcmips/vr/vr.c(235): vr_bus_reset() not implemented.
button manager
boot device: wd0
root on wd0a dumps on wd0b
isa_intr_alloc:............................|...
pcmcia1: card irq 3
isa_intr_alloc:............................|...
pcmcia1: card irq 3
isa_intr_alloc:............................|...
pcmcia1: card irq 3
WARNING: clock lost 20 days -- CHECK AND RESET THE DATE!
root file system type: ffs

柴垣 威
ie9t-sbgk@asahi-net.or.jp