Re: NetBSD/newsmips boot.fs

[Takao Shinohara <shin@sm.sony.co.jp>]

Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> writes:
> なんとなく newsmips の snapshot を作ってみたんですが、
> news5000 用に boot floppy (というか boot loader)を
> ちょっといじったものを作ってみたので、どなたか
> news5000 で試してみてもらえないでしょうか。

家のNWS-5000Xで試してみました。正常に起動しているようです。シリアルコン
ソールのログ(ulで加工してあります)を添付します。

篠原

========================================================================
> bo fd
NetBSD/newsmips Primary Boot
NetBSD/newsmips Secondary Boot
Booting fd()
|105816-2124272-153832\[89\57696/47083-=0x354e5c

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5T (INSTALL) #0: Tue Apr 10 10:25:10 JST 2001
    tsutsui@galant:/usr/src/sys/arch/newsmips/compile/INSTALL
total memory = 127 MB
avail memory = 114 MB
using 1651 buffers containing 6604 KB of memory
SONY NET WORK STATION, Model NWS-5000, Machine ID #16291
mainbus0 (root)
cpu0 at mainbus0: MIPS R4400 CPU (0x460) Rev. 6.0 with MIPS R4010 FPC Rev. 0.0
cpu0: L1 cache: 16KB/16B instruction, 16KB/16B data, direct mapped
cpu0: L2 cache: 1024KB/64B mixed, no snooping
ap0 at mainbus0
mkclock0 at ap0 slot0 addr 0xbf881fe0
dmac0 at ap0 slot0 addr 0xbe200000: ctlnum = 0, map = 0xb4c20000, va = 0
dmac1 at ap0 slot0 addr 0xbe300000: ctlnum = 1, map = 0xb4c21000, va = 200000
zsc0 at ap0 slot0 addr 0xbe900000
zstty0 at zsc0 channel 0 (console i/o)
zstty1 at zsc0 channel 1
esccf at ap0 slot2 addr 0xb8500000 not configured
fd at ap0 slot0 addr 0xbed20000 not configured
isdn at ap0 slot1 addr 0xb8000000 not configured
kb0 at ap0 slot0 addr 0xbf900000
wskbd0 at kb0
lp at ap0 slot0 addr 0xbed30000 not configured
ms at ap0 slot0 addr 0xbf900014 not configured
sb at ap0 slot0 addr 0xbed00000 not configured
sn0 at ap0 slot0 addr 0xbe600000
sn0: Ethernet address 08:00:46:01:16:9c
spifi0 at ap0 slot0 addr 0xbe280000: SCSI ID = 7, using dmac0
scsibus1 at spifi0: 8 targets, 8 luns per target
spifi1 at ap0 slot0 addr 0xbe380000: SCSI ID = 7, using dmac1
scsibus2 at spifi1: 8 targets, 8 luns per target
xb at ap0 slot0 addr 0xb4900000 not configured
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus1 target 0 lun 0: <SEAGATE, ST15150N, 6542> SCSI2 0/direct fixed
sd0: 4095 MB, 3712 cyl, 21 head, 107 sec, 512 bytes/sect x 8388315 sectors
cd0 at scsibus1 target 6 lun 0: <SONY, CD-ROM CDU-76S, 1.1c> SCSI2 5/cdrom removable
scsibus2: waiting 2 seconds for devices to settle...
md0: internal 2048 KB image area
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
erase ^H, werase ^W, kill ^U, intr ^C, status ^T
Terminal type? [vt100] xterm
Erase is backspace.
# ls
.profile  dev       etc       mnt2      tmp       var
bin       dist      mnt       sbin      usr
# 
========================================================================