[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

PowerBook G4 17inch 1.33GHz



あまり変わっていませんがなくさないように出しておきます。
ehci とか ubt って動くんだろうか…。
# 1.6.1 ではブートしません。(試してないけどしないはず)

NetBSD 1.6ZC (KATASE-SHIMA) #2: Thu Oct  2 04:35:42 JST 2003
	katase@stellvia:/a/0927/src/sys/arch/macppc/compile/KATASE-SHIMA
total memory = 1024 MB
avail memory = 933 MB
using 2048 buffers containing 52528 KB of memory
bootpath: /pci@f4000000/ata-6@d/disk@0
mainbus0 (root)
cpu0 at mainbus0: 7457 (Revision 101), ID 0 (primary)
cpu0: HID0 8450c19c<TBEN,NAP,DPM,ICE,DCE,XBSEN,SGE,LRSTK,FOLD,BHT>
cpu0: HID1 80018c80<EMCP,PC0,PC1,SYNCBE,ABE>
cpu0: 512KB on-chip L2 cache
nvram0 at mainbus0: addr 0xfff04000, size 0x4000
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
ofb0 at pci0 dev 16 function 0: ATI Technologies product 0x4e50
ofb0: 1440 x 900, 8bpp
wsdisplay0 at ofb0 (kbdmux ignored): console (std, vt100 emulation)
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
Broadcom Corporation product 0x4320 (miscellaneous network, revision 0x02) at pci1 dev 18 function 0 not configured
cbb0 at pci1 dev 19 function 0: Texas Instruments PCI1510 PCI-CardBus Bridge (rev. 0x00)
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 offset 0x13000: irq 22,6,23,8
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
snapper0 at obio0 offset 0x10000: irq 30,1,2
audio0 at snapper0: full duplex
adb0 at obio0 offset 0x16000 irq 47: 3 targets
akbd0 at adb0 addr 2: PowerBook G3 keyboard (Japanese layout)
wskbd0 at akbd0 (mux ignored): console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi
wsmouse0 at ams0 (mux ignored)
abtn0 at adb0 addr 7: brightness/volume button
battery0 at obio0 offset 0x0
wdc0 at obio0 offset 0x20000 irq 24
ohci0 at pci1 dev 24 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci0: can't map mem space
ohci1 at pci1 dev 25 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci1: can't map mem space
ohci2 at pci1 dev 26 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci2: interrupting at irq 29
ohci2: OHCI version 1.0, legacy support
usb0 at ohci2: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43)
ohci3: interrupting at irq 63
ohci3: OHCI version 1.0
usb1 at ohci3: USB revision 1.0
uhub1 at usb1
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43)
ohci4: interrupting at irq 63
ohci4: OHCI version 1.0
usb2 at ohci4: USB revision 1.0
uhub2 at usb2
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci1 dev 27 function 2: NEC USB Host Controller (rev. 0x04)
ehci0: interrupting at irq 63
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci3 ohci4
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
cbb0: interrupting at irq 53
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0
pcmcia0 at cardslot0
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
wdc1 at pci2 dev 13 function 0: interrupting at irq 39
fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x81)
fwohci0: interrupting at irq 40
fwohci0: OHCI 1.1, 00:0a:95:ff:fe:c4:9f:7a, 800Mb/s, 4096 max_rec, 8 ir_ctx, 8 it_ctx
gm0 at pci2 dev 15 function 0: Ethernet address 00:0a:95:c4:9f:7a
gm0: interrupting at irq 41
makphy0 at gm0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
atapibus0 at wdc0 channel 0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-R   UJ-816, , DXJ3> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wd0 at wdc1 channel 0 drive 0: <Hitachi IC25N080ATMR04-0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
fw0 at fwohci0: 00:0a:95:ff:fe:c4:9f:7a:0b:03:ff:ff:f0:01:00:00
ubt0 at uhub0 port 1 configuration 1 interface 0
ubt0: Apple Computer product 0x8203, rev 1.10/5.26, addr 2
ubt0: has isoc data
bthci0 at ubt0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs