[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Forward: Re: casio E100 / hpcmips



佐野@リムネットです。

<19991026150308W.jun@soum.co.jp>の記事において
jun@soum.co.jpさんは書きました。

>> E-500とE-100とではエントリが違うでってことなのかな。
えーっと、

>> > >    ID [00000000][00420000]
(省略)
>> we just tried the above settings on the E100.   if you change
>> ID to: 4104300 C10201 then the settings work ok.
>> 
>> [without changing the "ID" the boot program fails with unsupported 
>> CPU type.]
ID を [04104300][00C10201] に変更しないと、unsupported CPU type
が出てブートしなかったということですよね。
E-500 だとどちらの ID でもブートしてしまったのですが。

とりあえず、シリアルコンソールでログを取ってみたのですが参考に
なりますか。
pbsdboot.exe, netbsd とも snap-19991007 のものです。

ID [00000000][00420000] の場合
---
NetBSD 1.4K (GENERIC) #2: Sun Oct 10 02:36:06 JST 1999
    shin@touji:/work/src/current/src/sys/arch/hpcmips/compile/GENERIC
NEC VR4121 rev1.0
total memory = 32768 KB
avail memory = 28476 KB
using 435 buffers containing 1740 KB of memory
/work/src/current/src/sys/arch/hpcmips/vr/vr.c(159): vr_bus_reset() not implemented.
mainbus0 (root)
cpu0 at mainbus0: cpu0: NEC VR4100 CPU Rev. 6.0 with software emulated floating point Rev. 0.0
cpu0: L1 cache: 16KB/16B Instruction, 8KB/16B Data, direct mapped
cpu0: No L2 cache
fb0 at mainbus0: 240x320 pixels, 65536 colors, 20x14 chars
wsdisplay0 at fb0
/work/src/current/src/sys/arch/hpcmips/dev/fb.c(339): fb_alloc_screen()
/work/src/current/src/sys/arch/hpcmips/dev/fb.c(366): fb_show_screen()
/work/src/current/src/sys/arch/hpcmips/dev/fb.c(339): fb_alloc_screen()
wsdisplay0: screen 0 added (std, vt100 emulation)
vrip0 at mainbus0
vrcmu0 at vrip0 addr 0xb000060-0xb00007f
vrgiu0 at vrip0 addr 0xb000100-0xb00011f intr 8vrip_intr_setmask2:
level1[8] level2 mask:................||.|||||.|.||.||
Output-port:,,,,,,,,,,,,,,;,,,,,,,;,,;;;;;;,|.|..||.......||..|.|..||.||..||
com0 at vrip0 addr 0xc000000-0xc000007 intr 9vrgiu_port_write: not defined port name0
: ns16550a, working fifo
com0: console
vrip_intr_setmask2:
vrrtc0 at vrip0 addr 0xb0000c0-0xb0000df intr 2vrip_intr_setmask2:

vrbcu0 at vrip0 addr 0xb000000-0xb00001f
vrkiu0 at vrip0 addr 0xb000180-0xb00019f intr 7vrip_intr_setmask2:
level1[7] level2 mask:................
vrip_intr_setmask2:
level1[7] level2 mask:................

vrpmu0 at vrip0 addr 0xb0000a0-0xb0000bf intr 1vrip_intr_setmask2:

vrisab0 at vrgiu0:ISA port 0x14000000-0x18000000 mem 0x10000000-0x20000000
isa0 at vrisab0
/work/src/current/src/sys/arch/hpcmips/vr/vr.c(159): vr_bus_reset() not implemented.
boot device: <unknown>
root device: 

ID [04104300][00C10201] の場合
---
NetBSD 1.4K (GENERIC) #2: Sun Oct 10 02:36:06 JST 1999
    shin@touji:/work/src/current/src/sys/arch/hpcmips/compile/GENERIC
NEC VR4121 rev1.0
total memory = 32768 KB
avail memory = 28476 KB
using 435 buffers containing 1740 KB of memory
/work/src/current/src/sys/arch/hpcmips/vr/vr.c(159): vr_bus_reset() not implemented.
mainbus0 (root)
cpu0 at mainbus0: cpu0: NEC VR4100 CPU Rev. 6.0 with software emulated floating point Rev. 0.0
cpu0: L1 cache: 16KB/16B Instruction, 8KB/16B Data, direct mapped
cpu0: No L2 cache
fb0 at mainbus0: 240x320 pixels, 65536 colors, 20x14 chars
wsdisplay0 at fb0
/work/src/current/src/sys/arch/hpcmips/dev/fb.c(339): fb_alloc_screen()
/work/src/current/src/sys/arch/hpcmips/dev/fb.c(366): fb_show_screen()
/work/src/current/src/sys/arch/hpcmips/dev/fb.c(339): fb_alloc_screen()
wsdisplay0: screen 0 added (std, vt100 emulation)
vrip0 at mainbus0
vrcmu0 at vrip0 addr 0xb000060-0xb00007f
vrgiu0 at vrip0 addr 0xb000100-0xb00011f intr 8vrip_intr_setmask2:
level1[8] level2 mask:................||.|||||.|.||.||
Output-port:,,,,,,,,,,,,,,;,,,,,,,;,,;;;;;;,|.|..||.......||..|.|..||.||..||
com0 at vrip0 addr 0xc000000-0xc000007 intr 9vrgiu_port_write: not defined port name0
: ns16550a, working fifo
com0: console
vrip_intr_setmask2:
vrrtc0 at vrip0 addr 0xb0000c0-0xb0000df intr 2vrip_intr_setmask2:

vrbcu0 at vrip0 addr 0xb000000-0xb00001f
vrkiu0 at vrip0 addr 0xb000180-0xb00019f intr 7vrip_intr_setmask2:
level1[7] level2 mask:................
vrip_intr_setmask2:
level1[7] level2 mask:................

vrpmu0 at vrip0 addr 0xb0000a0-0xb0000bf intr 1vrip_intr_setmask2:

vrisab2 at vrgiu0:ISA port 0x14000000-0x18000000 mem 0x10000000-0x20000000
isa2 at vrisab2
/work/src/current/src/sys/arch/hpcmips/vr/vr.c(159): vr_bus_reset() not implemented.
boot device: <unknown>
root device: