[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

MP-C303 support is broken



# L-Router用の変更がMP-C303に影響しないかどうか調べようとして、まずは無
# 修正のカーネルが動くかどうか試してみて気が付きました......


========= begin ===========================================================
Victor InterLink MPC303 (NEC VR4122 rev0.3 180.633MHz)
total memory = 32768 KB
total memory banks = 2
memory bank 0 = 0x00000000 2700KB(0x002a3000)
memory bank 1 = 0x002a3000 30068KB(0x01d5d000)
avail memory = 27460 KB
using 435 buffers containing 1740 KB of memory
mainbus0 (root)
cpu0 at mainbus0: NEC VR4100 CPU (0xc70) Rev. 7.0 with software emulated floating point Rev. 0.0
cpu0: 32KB/16B direct-mapped L1 Instruction cache, 32 TLB entries
cpu0: 16KB/16B direct-mapped write-back L1 Data cache
vrip0 at mainbus0
vrbcu0 at vrip0 addr 0xf000000-0xf00001f
vrbcu0: cpu 180.633MHz, bus 30.105MHz, ram 60.211MHz
vrcmu0 at vrip0 addr 0xf000060-0xf00007f
vrgiu0 at vrip0 addr 0xf000140-0xf00015f intr 8
WIN setting:                                iiiiiiiiiiiiiiiiiioooooiiioioIII
I/O setting:                                iiiiiiiiiiiiiiiiiioooooiiioioiii
com0 at vrip0 addr 0xf000800-0xf000807 intr 9: ns16550a, working fifo
com0: console
com0: pwctl 0
vrrtc0 at vrip0 addr 0xf000100-0xf00011f intr 2
vrpmu0 at vrip0 addr 0xf0000c0-0xf0000df intr 1
vrled0 at vrip0 addr 0xf000180-0xf00018f intr 17
vrpciu0 at vrip0 addr 0xf000c00-0xf000dff intr 22
pci0 at vrpciu0 bus 0
pci0: i/o space, memory space enabled, rd/line ok
vrc4173bcu0 at pci0 dev 19 function 0: NEC VRC4173 Bus Control Unit (rev. 0x00)
vrc4173bcu0: default clock mask is 000f
vrc4173cmu at vrc4173bcu0 not configured
vrc4173giu at vrc4173bcu0 not configured
vrc4173piu at vrc4173bcu0 not configured
vrc4173kiu at vrc4173bcu0 not configured
vrc4173aiu at vrc4173bcu0 not configured
vrc4173ps2u at vrc4173bcu0 not configured
vrc4173bcu0: interrupting at 0xc0014f20
NEC VRC4173 AC97 Unit (audio multimedia, revision 0x01) at pci0 dev 19 function 1 not configured
ohci0 at pci0 dev 19 function 2: NEC USB Host Controller (rev. 0x01)
ohci0: can't map mem space
NEC VRC4173 PC-Card Unit (CardBus bridge, revision 0x01) at pci0 dev 1 function 0 not configured
NEC VRC4173 PC-Card Unit (CardBus bridge, revision 0x01) at pci0 dev 2 function 0 not configured
MediaQ Inc. MQ200 (miscellaneous display, revision 0x02) at pci0 dev 18 function 0 not configured
bivideo0 at mainbus0: no frame buffer information.
btnmgr0 at mainbus0
wskbd0 at btnmgr0 mux 1
hpcapm0 at mainbus0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
md0: internal 0 image area
boot device: <unknown>
unknown device major 0xffffffff
root device (default md0a): 
========= end ===========================================================