Re: PB2400 with G3 240MHz.

[Takeshi Shibagaki<ie9t-sbgk@asahi-net.or.jp>]

柴垣です。

From: Tsubai Masanari <tsubai@iri.co.jp>
Subject: Re: PB2400 with G3 240MHz.
Date: Tue, 05 Sep 2000 05:50:44 +0900
Message-ID: <E13W3CW-0004J3-00@ruri.iri.co.jp>

tsubai> なぜ lost interrupt になるのかはわかりませんが、たぶん CPU カード上に
tsubai> あると思われる L2 キャッシュの状態が気になります。
tsubai> 
tsubai> # cpu0... のあたり。
tsubai> 
tsubai> やはりこういう時は省略はしないほうが…:-)。

了解。手書きなので、横着してしまいました。もう一度つけます。
あらためて、コメントお願いします。

NetBSD 1.5E (PB) #0: Sun Aug 20 20 13:51:57 JST 2000
    shiba@pb2400:/mnt/shiba/NetBSD-current/macppc/src/sys/arch/macppc/comile/PB
total memory = 49152 KB
avail memory = 40960 KB
using 640  buffers containing 2560 KB of memory
mainbus0 (root)
cpu0 at mainbus0:  750 (Revision 202), ID 0 (primary)
cpu0
bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11
pchb0: Apple Computer Bandit Host-PCI Bridge (rev. 0x03)
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
mediabay0 at obio0 offset 0x34 irq 29
wdc0 at obio0 offset 0x20000 irq 13: DMA transfer
wd0 at wdc0 channel 0 drive 0: <IBM-DMCA-21440>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 1378MB, 2800 cyl, 16 head, 63 sec, 512 betes/sect x 2822400 sectors
wd0: drive supports PIO mode 4, DMA mode 2
adb0 at obio0 offset 0x16000 irq 18: 2 targes
aed0 at adb0 addr 0: ADB Event device
adbd0 at adb0 addr 2: PowerBook keyboard (Japanese layout)
wskbd0 at adbd0: console keyboard
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400dpi
wsmouse0 at ams0
ofb0 at pci0 dev 17 function 0: Chips and Technologies 65550
ofb0: 800 x 600, 8bpp
wsdisplay0 at ofb0: console (std, vt100 emulation), using wskbd0
cbb0 at pci0 dev 19 function 0: Texas Instruments PCI1130 PCI-CardBus Bridge (rev. 0x04)
cbb1 at pci0 dev 19 function 1: Texas Instruments PCI1130 PCI-CardBus Bridge (rev. 0x04)
cbb0: interrupting at irq 22
cbb0: cacheline 0x8 lattimer 0x20
cbb0: bhlc 0x822008 lscp 0x20000000
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 0 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cbb1: interrupting at irq 23
cbb1: cacheline 0x8 latimer 0x20
cbb1: bhlc 0x822008 lscp 0x20000000
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 0 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
scsibus0: waiting 2 seconds for devices to settle...
boot device: wd0
root on wd0a dumps on wd0b
boot device: wd0
root on wd0a dumps on wd0b
wdc0:0:0: lost interrupt
	type: ata tc_bcount: 2048 tc_skip: 0
wdc0:0:0: intr with DRQ (st=0x58)
wd0a: device timeout reading fsbn 64 of 64-67 (wd0 bn 64; cn 0 tn 1 sn1),retrying
wd0: soft error (corrected)
wdc0:0:0: lost interrupt
	type: ata tc_bcount: 1024 tc_skip: 0
wdc0:0:0: intr with DRQ (st=0x58)
wd0a: device timeout reading fsbn 2 of 2-3 (wd0 bn 2; cn 0 tn 0 sn 2), retrying
wd0: soft error (corrected)
no file system for wd0 (dev 0xa00)
cannot mount root, error = 79
root device (default wd0a):

柴垣 威
ie9t-sbgk@asahi-net.or.jp