[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: PowerMac 9500/120,132
In message ``Re: PowerMac 9500/120,132''
Wed Dec 20 11:24:54 JST 2000,
you@nightbreak.org (Y. Takizawa) writes:
> # XFree86 4.0.1 とか Windows 向け廉価 Ethernet カードとか
を試してみた結果です(^^;)．
[1] XFree86 4.0.1 (+ diff-2000-10-16.gz)
起動時に
ofb0 at pci0 dev 13 function 0: ATI Technologies Mach64 GX
と出るので ati ドライバかなあと勝手に解釈して，
--(XFree86.0.log 抜粋ここから)--
...
(--) PCI: (0:13:0) ATI Mach64 GX rev 3, Mem @ 0x81000000/24
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MXB
[1] -1 0x00000000 - 0x0000ffff (0x10000) IXB
(II) OS-reported resource ranges:
(II) Active PCI resource ranges:
[0] -1 0xf3000000 - 0xf3ffffff (0x1000000) MXBE
[1] -1 0x81000000 - 0x81ffffff (0x1000000) MXB(B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xf3000000 - 0xf3ffffff (0x1000000) MXBE
[1] -1 0x81000000 - 0x81ffffff (0x1000000) MXB(B)
(II) OS-reported resource ranges after removing overlaps with PCI:
(II) All system resource ranges:
[0] -1 0xf3000000 - 0xf3ffffff (0x1000000) MXBE
[1] -1 0x81000000 - 0x81ffffff (0x1000000) MXB(B)
(II) ATI: ATI driver (version 5.3.5) for chipsets: ati, ativga
(II) r128: Driver for ATI Rage 128 chipset: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RK (PCI), ATI Rage 128 RL (AGP),
ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP)
(II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag200, mgag200 PCI, mgag400
(II) FBDev: driver for framebuffer: fbdev, afb
inw(0x42e8) at line 352 in atiprobe.c
outw(0x42e8, 0x9000) at line 356 in atiprobe.c
outw(0x42e8, 0x500f) at line 358 in atiprobe.c
inw(0x92e8) at line 361 in atiprobe.c
outw(0x92e8, 0x5a5a) at line 362 in atiprobe.c
inw(0x9ae8) at line 363 in atiprobe.c
inw(0x92e8) at line 364 in atiprobe.c
outw(0x92e8, 0x0) at line 375 in atiprobe.c
outw(0x42e8, 0x0) at line 380 in atiprobe.c
ATIMach64Probe IOBase = 2ec, type 0
ATIMach64Probe IOBase = 1cc, type 0
ATIMach64Probe IOBase = 1c8, type 0
ATIMach64Probe IOBase = 2ec, type 0
(WW) ATI: PCI Mach64 in slot 0:13:0 could not be detected!
See README.ati for details.
(EE) No devices detected.
Fatal server error:
no screens found
...
--(ここまで)--
port-powerpc-ja の過去ログ参照しながらいじれば
動くようになるのかなと思いつつ何もやってません(を)．
例によって X 使用は想定してなかったので…．
[この時の XF86Config と XFree86.0.log]
http://www.nightbreak.org/NetBSD/box/XFree86.0.log-9500.txt
http://www.nightbreak.org/NetBSD/box/XF86Config-9500.txt
[2] Windows 向け廉価 Ethernet カード
地元で 1000 円ちょっと(新品)で手に入れた
corega Ether PCI-T が余っていたので入れたところ
--(ここから)--
...
ne0 at pci1 dev 15 function 0: RealTek 8029 Ethernet
ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
ne0: Ethernet address 00:90:99:12:ce:cb
ne0: interrupting at irq 29
...
--(ここまで)--
と認識されて全く問題なく利用できています．
# mc と合わせてお部屋の簡易ルータ兼ファイルサーバにできる♪
ただ，デバイスツリーが変化したせいか，
auto-boot? を true にしてあっても電源を入れるとブートできず，
Open Firmware のコンソールで boot コマンド入れないと
起動できない…ような感じになっています(あいまい)．
reset-all とか OS からのリブートでは起動できるんですが…．
[ne0 認識時の dmesg 出力 (先の dmesg 出力の更新版)]
http://www.nightbreak.org/NetBSD/box/1.5O-macppc-dmesg-9500.txt
--
Y. Takizawa (滝沢陽三)
you@nightbreak.org, takizawa@computer.org
``Don't feel as if the key to successful computing is only in your hands.''